GIGABYTE Alaplap S1700 Z790 AORUS ELITE AX-W INTEL Z790, ATX CPU LGA1700
socket: Support for the 13th and 12th Generation IntelŽ Core?, PentiumŽ Gold and
CeleronŽ Processors L3 cache varies with CPU (Please refer CPU Support List
for more information.) Chipset IntelŽ Z790 Express Chipset Memory
Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.)
/6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) /
5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules 4 x DDR5 DIMM sockets
supporting up to 192 GB (48 GB single DIMM capacity) of system memory Dual
channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory
modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM
1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory
modules (The CPU and memory configuration may affect the supported memory
types, data rate (speed), and number of DRAM modules, please refer to Memory
Support List for more information.) Onboard Graphics Integrated Graphics
Processor-IntelŽ HD Graphics support: 1 x HDMI port, supporting a maximum
resolution of 4096x2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3. 1
x DisplayPort, supporting a maximum resolution of 4096x2304@60 * Support for
DisplayPort 1.2 version and HDCP 2.3 (Graphics specifications may vary
depending on CPU support.) Audio RealtekŽ Audio CODEC High Definition
Audio 2/4/5.1/7.1-channel * You can change the functionality of an audio
jack using the audio software. To configure 7.1-channel audio, access the audio
software for audio settings. Support for S/PDIF Out LAN RealtekŽ
2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) Wireless Communication module
IntelŽ Wi-Fi 6E AX211 (PCB rev. 1.0) WIFI a, b, g, n, ac, ax, supporting
2.4/5/6 GHz carrier frequency bands BLUETOOTH 5.3 Support for 11ax 160MHz
wireless standard and up to 2.4 Gbps data rate RealtekŽ Wi-Fi 6E RTL8852CE
(PCB rev. 1.1) WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier
frequency bands BLUETOOTH 5.3 Support for 11ax 160MHz wireless standard and
up to 2.4 Gbps data rate * Actual data rate may vary depending on environment
and equipment. Expansion Slots CPU: 1 x PCI Express x16 slot, supporting
PCIe 5.0 and running at x16 (PCIEX16) * For optimum performance, if only one
PCI Express graphics card is to be installed, be sure to install it in the
PCIEX16 slot. Chipset: 1 x PCI Express x16 slot, supporting PCIe 4.0 and
running at x4 (PCIEX4_1) 1 x PCI Express x16 slot, supporting PCIe 3.0 and
running at x4 (PCIEX4_2) Storage Interface CPU: 1 x M.2 connector
(Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
Chipset: 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0
x4/x2 SSD support) (M2P_SB, M2Q_SB) 1 x M.2 connector (Socket 3, M key, type
22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB) 6 x SATA 6Gb/s
connectors RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage
devices RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
* Refer to 2-8 Internal Connectors, for the installation notices for the M.2
and SATA connectors. USB Chipset: 1 x USB Type-CŽ port on the back
panel, with USB 3.2 Gen 2x2 support 1 x USB Type-CŽ port with USB 3.2 Gen 2
support, available through the internal USB header 2 x USB 3.2 Gen 2 Type-A
ports (red) on the back panel 5 x USB 3.2 Gen 1 ports (3 ports on the back
panel, 2 ports available through the internal USB header) Chipset+2 USB 2.0
Hubs: 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available
through the internal USB headers) Internal I/O Connectors 1 x 24-pin
ATX main power connector 2 x 8-pin ATX 12V power connectors 1 x CPU fan
header 1 x water cooling CPU fan header 3 x system fan headers 1 x system
fan/water cooling pump header 2 x addressable LED strip headers 2 x RGB LED
strip headers 4 x M.2 Socket 3 connectors 6 x SATA 6Gb/s connectors 1 x
front panel header 1 x front panel audio header 1 x USB Type-CŽ header, with
USB 3.2 Gen 2 support 1 x USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 2 x
Thunderbolt? add-in card connectors 1 x Trusted Platform Module header (For
the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1 x reset button 1 x
Q-Flash Plus button 1 x Clear CMOS button 1 x reset jumper 1 x Clear CMOS
jumper Back Panel Connectors 1 x USB Type-CŽ port, with USB 3.2 Gen
2x2 support 2 x USB 3.2 Gen 2 Type-A ports (red) 3 x USB 3.2 Gen 1 ports 4
x USB 2.0/1.1 ports 2 x SMA antenna connectors (2T2R) 1 x HDMI 2.0 port 1
x DisplayPort 1 x RJ-45 port 1 x optical S/PDIF Out connector 2 x audio
jacks I/O Controller iTEŽ I/O Controller Chip H/W Monitoring
Voltage detection Temperature detection Fan speed detection Water
cooling flow rate detection Fan fail warning Fan speed control * Whether
the fan (pump) speed control function is supported will depend on the fan (pump)
you install. BIOS 1 x 256 Mbit flash Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features
Support for GIGABYTE Control Center (GCC) * Available applications in GCC
may vary by motherboard model. Supported functions of each application may also
vary depending on motherboard specifications. Support for Q-Flash Support
for Q-Flash Plus Support for Smart Backup Bundled Software NortonŽ
Internet Security (OEM version) LAN bandwidth management software
Operating System Support for Windows 11 64-bit Support for Windows 10
64-bit Form Factor ATX Form Factor; 30.5cm x 24.4cm