GIGABYTE Alaplap S1700 Z790 AORUS MASTER INTEL Z790, E-ATX CPU
LGA1700 socket: Support for the 13th and 12th Generation IntelŽ Core?,
PentiumŽ Gold and CeleronŽ Processors* L3 cache varies with CPU * Please
refer to CPU Support List for more information. Chipset
IntelŽ Z790 Express Chipset Memory Support for DDR5
7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) /
7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) /
5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of
system memory Dual channel memory architecture Support for ECC Un-buffered
DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC
Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory
Profile (XMP) memory modules (Please refer Memory Support List for more
information.) Onboard Graphics Integrated Graphics
Processor-IntelŽ HD Graphics support: 1 x DisplayPort, supporting a maximum
resolution of 4096x2304@60 Hz * Support for DisplayPort 1.2 version and HDCP
2.3 (Graphics specifications may vary depending on CPU support.)
Audio RealtekŽ ALC1220-VB CODEC * The front panel line out jack
supports DSD audio. ESS ES9118 DAC chip Support for DTS:XŽ Ultra High
Definition Audio 2/4/5.1-channel * You can change the functionality of an
audio jack using the audio software. To configure 5.1-channel audio, access the
audio software for audio settings. Support for S/PDIF Out LAN
MarvellŽ AQtion AQC113C 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1
Gbps/100 Mbps) Wireless Communication module IntelŽ
Killer? Wi-Fi 6E AX1690 WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz
carrier frequency bands BLUETOOTH 5.3 Support for 11ax 160MHz wireless
standard and up to 2.4 Gbps data rate (Actual data rate may vary depending on
environment and equipment.) Expansion Slots CPU: 1 x PCI
Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * The
PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot
operates at up to x8 mode when a device is installed in the M2C_CPU connector.
* For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16 slot. Chipset: 1 x PCI
Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4) 1 x PCI
Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1) Support for
AMD CrossFire? technology (PCIEX16 and PCIEX4) Storage Interface
CPU: 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2
SSD support) (M2C_CPU) 1 x M.2 connector (Socket 3, M key, type 22110/2280
PCIe 4.0 x4/x2 SSD support) (M2A_CPU) Chipset: 1 x M.2 connector (Socket
3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB) 1 x M.2
connector (Socket 3, M key, type 2280/2260 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
1 x M.2 connector (Socket 3, M key, type 2280/2260 SATA and PCIe 4.0 x4/x2 SSD
support) (M2M_SB) 4 x SATA 6Gb/s connectors RAID 0, RAID 1, RAID5, and RAID
10 support for NVMe SSD storage devices RAID 0, RAID 1, RAID5, and RAID 10
support for SATA storage devices USB Chipset: 3 x USB
Type-CŽ ports, with USB 3.2 Gen 2x2 support (2 ports on the back panel, 1 port
available through the internal USB header) Chipset+2 USB 3.2 Gen 2 Hubs:
1 x USB Type-CŽ port on the back panel, with USB 3.2 Gen 1 support 7 x USB
3.2 Gen 2 Type-A ports (red) on the back panel Chipset+2 USB 3.2 Gen 1 Hubs:
8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available
through the internal USB headers) Chipset+USB 2.0 Hub: 4 x USB 2.0/1.1
ports available through the internal USB headers Internal I/O
Connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V
power connectors 1 x CPU fan header 1 x water cooling CPU fan header 4 x
system fan headers 4 x system fan/water cooling pump headers 2 x addressable
LED strip headers 2 x RGB LED strip headers 5 x M.2 Socket 3 connectors 4
x SATA 6Gb/s connectors 1 x front panel header 1 x front panel audio header
1 x USB Type-CŽ header, with USB 3.2 Gen 2x2 support 2 x USB 3.2 Gen 1
headers 2 x USB 2.0/1.1 headers 1 x noise detection header 2 x
Thunderbolt? add-in card connectors 1 x Trusted Platform Module header (For
the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1 x power button 1 x reset
button 1 x reset jumper 1 x Clear CMOS jumper 2 x temperature sensor
headers Voltage Measurement Points Back Panel Connectors
1 x Q-Flash Plus button 1 x Clear CMOS button 2 x SMA antenna
connectors (2T2R) 1 x DisplayPort 1 x USB Type-CŽ port, with USB 3.2 Gen 1
support 2 x USB Type-CŽ ports, with USB 3.2 Gen 2x2 support 7 x USB 3.2 Gen
2 Type-A ports (red) 4 x USB 3.2 Gen 1 ports 1 x RJ-45 port 1 x optical
S/PDIF Out connector 2 x audio jacks I/O Controller
iTEŽ I/O Controller Chip H/W Monitoring Voltage
detection Temperature detection Fan speed detection Water cooling flow
rate detection Fan fail warning Fan speed control * Whether the fan (pump)
speed control function is supported will depend on the fan (pump) you install.
Noise detection BIOS 1 x 256 Mbit flash Use of
licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features Support for GIGABYTE Control Center (GCC)
* Available applications in GCC may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard
specifications. Support for Q-Flash Support for Q-Flash Plus Support for
Smart Backup Bundled Software NortonŽ Internet
Security (OEM version) LAN bandwidth management software
Operating System Support for Windows 11 64-bit Support for
Windows 10 64-bit Form Factor E-ATX Form Factor;
30.5cm x 26.0cm